Hem ›
Produkter ›
Single Truss ›
DT 31/2 ›
DT 31/2-Circle Part-1,5m-90°

DT 31/2-Circle Part-1,5m-90°

Kod: 1721300006

DuraTruss DT 31/2-Circle Part-1,5m-90dgr - Circle part 90° for 1,5 meter circle

The DURATRUSS DT31/2 is a 1-point trussing system, also referred as a "pipe", which is interconnected with a conical connector, bolts and steel pins. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The 50mm aluminium belt tube with a wall thickness of 2 mm gives this system an excellent weight-bearing capacity ratio.

The DT 31/2 system can be extended as desired with corners, T-branches, angles and circles.

Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.

The DT31 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this series.
For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers.
The 50mm tubes are from high grade aluminum and show 2mm wall thickness.
The system from European production is compatible to the most common systems in the market.

Specifications:
- Main tube diameter: 50mm
- Wall thickness main tube: 2mm
- Alloy: EN-AW 6082 T6 (AlMgSi1)
- Connection: conical connectors with bolt and splint
- Delivery includes: 2 conical connectors, 4 bolt, 4 splint
- Produced according DIN 4112, DIN 4113-1