DuraTruss DT 32/2-C41HX - 4-way-X-joint, horizontal
The DT32/2 series is a 2-point-trussing-system with conical coupler (spigot), trusspin and safety clip. This quick connector system closes force-lockingly with the belt tube and allows rapid construction during frequent assembly and dismantling. The main tubes are made of 50mm aluminum tube with a wall thickness of 2mm and give this system an outstanding strength-to-weight ratio. The struts have a diameter of 20 mm with a wall thickness of 2mm. Each truss length includes all necessary conical connectors, steel pins and safety clips.
Optionally the system can be extended with various lengths, corners, T-branches and angles. Extensive accessories such as hooks, connectors, floor plates, wall brackets, spacers and much more complete the product line.
The system is from European production which is compatible to the most common systems in the market
The DT32 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series.
For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers.
The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness.
The system from European production is compatible to the most common systems in the market.
Specifications:
- Main tube diameter: 50mm
- Wall thickness main tube: 2mm
- Bracing diameter: 20mm
- Wall thickness bracing: 2mm
- Alloy: EN-AW 6082 T6 (AlMgSi1)
- Connection: conical connectors with bolt and splint
- Delivery includes: 6 conical connectors, 12 bolts, 12 splints
- Produced according DIN 4112, DIN 4113-1
-
DT 20/40-Safety Clip
Code: 1744000010
-
DT 30/40-Steel Pin
Code: 1749000006
-
DT 30/40-Steel Pin-M8
Code: 1749000007
-
DT 30/40-Short Pin
Code: 1749000013
Overview DT 32/2 Series 